Pantech Sirius Alpha IS06 Basic Manual page 12

Charging the Battery Pack
PANTECH microUSB-18 pin (charger)
conversion cable
Charging time takes approximately 190 minutes.
① Connect the PANTECH microUSB-18 pin (charger)
conversion cable to the common AC adapter
01/02 (sold separately).
② Open the microUSB connection jack cover on the
IS06 and connect the PANTECH microUSB-18 pin
(charger) conversion cable.
③ Plug the common AC adapter 01/02 (sold
separately) into an 100 V AC power outlet.
The LED lamp lights up red, and
displayed.
The LED lamp will go out when charging is
complete.
④ Unplug the PANTECH microUSB-18 pin (charger)
conversion cable from the IS06 in a straight line
once charging is complete.
⑤ Close the microUSB connection jack cover.
⑥ Unplug the common AC adapter 01/02 (sold
separately) from the power outlet.
10
Common AC adapter
01/02 (sold separately)
– will be
To remove the PANTECH microUSB-18 pin
■
(charger) conversion cable from the common AC
adapter 01/02 (sold separately), pull the cable out
in a straight line while holding down the release
buttons on both sides of the connector.
If you charge the IS06 when the battery pack has
■
no power left, it may take a few moments for the
charging notice to display on the screen.