JVC LYT0844-001A Instructions Manual page 7

How To Attach The Strap
1 Thread one end of the strap through the
eyelet, then pass the other end through the
loop.
2 Attach the screw to the tripod mounting
socket. To tighten the screw firmly, use a
coin, etc.
3 Adjust the length with the adjuster.
NOTES:
You can use the strap as a shoulder strap by
adjusting the length with the adjuster.
Because a loose screw may cause damage to the
camcorder, make sure to tighten the screw firmly to
the tripod mounting socket when carrying the
camcorder.
Use the strap only with this camcorder.
Do not grip the camcorder too firmly when the
screw is attached. Doing so may cause damage to
the tripod mounting socket.
1
2
7
EN
3