Troubleshooting - Omron HBF-306 Instruction Manual

Troubleshooting

Error display Cause
Electrodes were not firmly
grasped.
Measurement posture grip
was not stable.
Hands are dry.
The values of body fat
percentage, BMR and BMI are and gender again. (Set button)
outside the measurable range.
Abnormal operation.
Trouble
When the O/I button Are the batteries worn out?
is pushed, nothing is
displayed.
The value of body fat Is the measurement posture
percentage displayed correct?
is abnormally high
(or low).
An error (E1 to E6) is Please refer to above table.
displayed and the
measurement is
impossible.
The results differ
extremely for each
measurement.
Other conditions.
If you are unable to obtain a correct measurement after taking
the above-mentioned troubleshooting steps, please contact the nearest
OMRON dealer.
EN-02-19[HBF306]-15
Cause
Is the battery polarity correct? Insert the batteries correctly.
Please refer to "About body fat Measurement" (pg. 6-7)
Push the O/I button again and restart from the beginning.
18
18
What to do (the next button
to push)
Grasp the grips correctly and
measure. (Start button)
Measure without moving your arms.
(Start button)
Slightly moisten hands with a wet
towel, then measure. (Start button)
Check the set height, weight, age,
Push the O/I button again and
start measurement. If this error
occurs again, consult the nearest
Omron dealer.
Solution
Replace both batteries with
new ones
Measure again in correct
posture.
7/5/05, 11:08 AM