Yamaha Commercial Audio
5.2
PARAMETRIC EQ EDITING
The current channel's Name, Color, Fader, Level Meters, [ON] and [CUE]
buttons are shown in the left column. At the bottom-left, there are "previous"
and "next" arrow buttons for navigating to different channels.
Note: the In/Out meters display the levels going In and Out of the EQ section.
One band of Parametric EQ can be adjusted at a time. Press one of the green
circles to select the band, and it will be highlighted yellow. EQ bands in
StageMix are labelled as follows:
HP = HPF (input channels only)
1 = Low Band
2 = Low-Mid Band
3 = High-Mid Band
4 = High Band
The current values for Freq, Gain and Q will be displayed for the currently
selected EQ band.
Gain and Frequency can be adjusted by dragging the circle around the graph.
Q is adjusted by using the iPad's "pinch" gesture: hold one finger (or thumb)
on the screen while moving another finger closer to or further away from the
first.
M7CL StageMix V3.0 User Guide
Page 18