Trouble-Shooting Symptoms - Hearth and Home Technologies PS35 Service Manual

ECO CHOICE PELLET STOVE SERVICE MANUAL
A. PLUG IN STOVE -- NO RESPONSE
1) CHECK THE POWER SUPPLY FOR 115 VOLTS
2) CHECK THE FUSE IN THE JUNCTION BOX (7 AMP)
3) CHECK SNAP DISC #3 FOR POWER
4) CHECK CONTROL BOX
B. CALL LIGHT ON -- NO FIRE -- NO FUEL IN FIREPOT
1) CHECK HOPPER FOR BRIDGING OF PELLETS
2) PUSH RESET BUTTON & ADJUST FEED ADJUSTMENT PLATE
3) CHECK TO MAKE SURE THE FRONT DOOR IS CLOSED
4) CHECK VENTING SYSTEM FOR OBSTRUCTIONS
5) CHECK VACUUM SWITCH AND VACUUM HOSE
6) CHECK FEED MOTOR
7) CHECK EXHAUST BLOWER
8) CHECK HOPPER SWITCH
C. CALL LIGHT ON -- NO FIRE -- PARTIALLY BURNED FUEL IN POT
1) CHECK FIREPOT AND CLEAN
2) CHECK THERMOCOUPLE
*GREEN LIGHT----- 2.7 mV (+.5mV)
*RED LIGHT--------- 12.0 mV (+ 1mV)
3) CHECK INITIAL FEED TIME (60 SECONDS)
D. CALL LIGHT ON -- NO FIRE -- FUEL IN FIREPOT
1) CHECK FIREPOT FOR "CLINKER" MATERIAL
2) CLEAN FIREPOT
3) CHECK IGNITER
4) CHECK CONTROL BOX
TROUBLE SHOOTING & REPAIR
CAUTION
Shock hazard.
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Unplug cord before doing any checks or repairs.
• Do NOT touch wires while unit is plugged in.
PAGE 3