Advertisement
Control Locators
FREQUENCY
SELECT SWITCH
TRANSMTTER
ON/OFF SWITCH
5
UM-3 (AA) x 6
BATTERY COMPARTMENT
USB OUT
LINE OUT
DC 9V
USB OUT
DC IN JACK
LINE OUT JACK
HEADPHONE JACK
Unpacking
1
Remove plastic bag covering unit.
2
Remove AC ADAPTER from packing.
3
Remove tie from A/C ADAPTER.
4
Open lid and remove styrofoam shipping
material from turntable.
5
Remove white protective needle cover by gently
pulling towards the front of the unit.
Power Source
1
Plug the AC ADAPTER into appropriate walloutlet.
2
Plug the small end of the adapter into the
ADAPTER JACK on the back of the unit.
Getting Started
Headphones Jack operation
1
Connect headphones to the Headphone Jack.
2
Adjust volume to the desired listening level.
Note: When using headphones, sound from
the unit will be turned off.
Headphone Jack
The sound from all speakers is cut off.
NOTE: Headphones not included with unit.
Battery Operation
1. The battery compartment is located at the
bottom of the unit. Push the lever at the center
of the door toward the rear of the unit, then lift
the door free.
2. Six "AA" size batteries are required. Refer
to the orientation diagram shown inside the
battery compartment when installing.
3. Replace the battery cover.
IMPORTANT:
Remove all batteries from your unit if it will not be
used for an extended period of time.
Do not use rechargeable batteries and do not leave
discharged batteries in the battery compartment.
6
Advertisement
