Advertisement
Basic Operation
Turntable
1
Press the POWER button to turn the unit on.
2
Set the SPEED CONTROL SWITCH to the
correct speed (33-1/3 or 45) for the selected
record.
3
Slide the LID LOCK towards the rear of the unit
to open the lid.
4
Lift the TONE ARM from its rest and gently move
it to the right until it clicks into the ARM LOCK
as shown below.
5
Remove the 45rpm adapter from the unit. If you
are playing a 45 rpm record, place the adapter
on the spindle.
6
Place record on the turntable.
7
Gently move the tone arm from the ARM LOCK
and lower it to the desired starting point on the
record.
8
Slide the VOLUME CONTROL to adjust the
volume level.
9
At the end of the record, lift the TONE ARM from
the record and return it to the ARM REST.
7
FM Transmitter
This unit is equipped with a built in FM transmitter.
This feature allows the user to listen to their albums
on any FM radio within approximately 15-20 feet.
To use this feature, follow the instructions below.
1
Slide the TRANSMITTER ON/OFF switch to
the ON position.
2
Slide the FREQUENCY SELECT switch to
either 88.1 or 89.9 MHz.
3
Adjust the tuner on your FM radio to match
the selected frequency from step 2.
4
Follow the instructions for Turntable Operation
on the left side of this page.
5
Adjust the volume of your FM radio accordingly.
Notes:
1
Switch between the two frequencies listed
above to determine which gives you the best
signal for your location.
2
The maximum range of the FM Transmitter is
approximately 20 feet,depending on your
location.
3
For best performance, a clear line of sight
between the Revolution and your FM radio is
recommended.
SPINDLE
TURNTABLE
45 RPM ADAPTER
Control Locators
LID LOCK
CARRY STRAP
SPEED
CONTROL
SWITCH
POWER
INDICATOR
POWER
VOLUME
ON/OFF
CONTROL
SWITCH
TONE ARM
ARM HOOK
4
Advertisement
