Advertisement
Welcome
Thank you for purchasing the Crosley Revolution
(CR6002A) Before operating this unit, please read
this manual thoroughly and retain it for future
reference.
About This Manual
Instructions in this manual describe the control
functions of the CR6002A.
Included in the package:
Crosley Revolution
AC Power Adaptor
45 RPM Adaptor
USB Cable
Software CD
Software Installation Guide
Table of Contents
Getting Started
Control Locators...................... 4,5
Unpacking............................... 6
Power Source......................... 6
Headphones Jack Operation........ 6
Battery Operation....................... 6
Basic Operation
Turntable ................................ 7
FM Transmitter ....................... 7
USB Output............................... 8
Audio Output .......................... 8
45rpm Adapter ....................... 8
General
Transporting ........................... 9
Troubleshooting Guide ........... 9
Warranty.................................. 10
USB
Using the included software and cable, the USB
connection allows you record your records onto your
computer. Follow these instructions to use the USB.
1
Insert the enclosed software CD into your
computer.
2
Connect the small end of the USB cable to the
USB JACK on the back of the unit.
3
Follow the instructions on the computer screen
to install the software. If the software does not
load automatically, browse the CD and open
the Read Me folder for further instructions.
4
Connect the other end to a USB port on your
computer.
5
On your computer, open the Record Recording
Software.
6
For instructions on operating the Record
Recording Software, browse the software CD
and open the Read Me folder.
Basic Operation
Audio Output
Using the Audio Output allows you to listen to your
Revolution on a home stereo, TV or other stereo
source. The type of cable needed will vary
depending on the input jack configuration of your
external device. The output jack on your Revolution
is a standard 3.5mm stereo output. See your local
electronics store to purchase the correct cable for
your needs. For more information on hooking up
to an external device, see the owner's manual for
the selected device.
Note: You can still listen to your unit when using
the Audio Output feature.
Accessory:ADAPTER FOR 45 RPM
This adaptor allows you to play 45 RPM records.
1
Place the 45 RPM adapter over the spindle.
2
Gently place your 45 RPM record onto the
turntable.
3
Follow the steps under turntable operation to
play your record.
8
Advertisement
