Turning On The Face Detection Mode; Checking The Remaining Battery Power; Checking The Remaining Space On The Recording Media - JVC GZ-HM200 Instructions Manual

Turning on the Face Detection Mode

If you set this mode on, the camcorder detects
the faces and adjust brightness and focus so
that the faces are recorded clearly.
Preparation:
• Select ! or # mode.
• Select the recording mode.
Select .
To turn off the face detection mode

Select again.
NOTE
•
If the LCD monitor is turned upside down,
is not displayed. Change the setting when
the LCD monitor is in the normal position.
•
Depending on the condition, faces may not
be detected.
•
If the face detection does not work correctly,
turn off the mode before recording.
Checking the Remaining Battery
Power
Preparation:
•
Disconnect the AC adapter from the
camcorder.
•
Attach the battery pack.
•
Select the recording mode.
!
For mode:
Press INFO three times or INFO and then
;
select .
#
For mode:
Press the INFO button.
DIRECT
DISC
INFO
To return to the normal screen

Select [QUIT] or press INFO.
T
W
/
QUIT
NOTE
The recordable time display should only be
used as a guide. It is displayed in 10-minute
units.
Checking the Remaining Space
on the Recording Media
Preparation:
•
!
Select mode.
•
Select the recording mode.
Press the INFO button once (Slot A) or
twice (Slot B).
DIRECT
DISC
INFO
The maximum recording time is displayed for
each picture quality mode.
To change the video quality

1) Select the video quality.
2) Select [SET].
To change the recording media

1) Press INFO to select SLOT A or
SLOT B.
2) Select [SET].
To quit the screen

Select [QUIT].
MAX RECORDING TIME
SLOT B
0h00m
0h00m
0h00m
0h00m
SET
QUIT