Additional Information - JVC GY-HD250U Reference Manual



Additional Information

GY-HD250U's "VF SIGNAL" menu should be set to "RGB" when VF-P400U is used. All VF displays are available

except focus assist.
When using VF-HP840U in a SD studio, Set the GY-HD250U's "VF SIGNAL" menu to "RGB".

SD CMP available only; RM-P210U can not pass full bandwidth HD Y, R-Y, B-Y.

Genlock must be NTSC VBS only – HD Tri level sync can not be passed by RM-P210U back to the GY-HD250U.

GY-HD250U's "ANALOG OUT CHAR." menu should be set to "OFF", – otherwise they will appear at RM-P210U

component outputs.
GY-HD250U's "TALLY SYSTEM" menu should be set to "STUDIO".

Sony 26pin Cable can be used to connect RM-P210U with the KA-HD250U/U(A).

Version 1.12
7