Audio Input Signal Selection - JVC GY-DV5001 Instructions Manual

6-7 Audio Input Signal Selection

VF
ZEBRA
OFF
SKIN AUTO
ON
AREA WHITE
ACCU
FOCUS
VTR AUDIO
LEVELE CH-1
5
FRONT AUDIO IN
connector
The GY-DV5000 is provided with the FRONT AUDIO IN
connector and the REAR AUDIO IN connector for audio input.
Two channels of sound can be recorded on the tape in digital
PCM format. Using the AUDIO INPUT switch, select for each
channel (CH1 and CH2) whether the sound to be recorded
should be the sound from the FRONT AUDIO IN connector or
the sound from the REAR AUDIO IN connector.
Selecting the CH-1 channel input sound
Make the selection using the CH-1 AUDIO INPUT switch.
FRONT : The sound from the FRONT AUDIO IN connector
is recorded on the CH-1 channel.
REAR : The sound from the REAR AUDIO IN connector is
recorded on the CH-1 channel.
Selecting the CH-2 channel input sound
Make the selection using the CH-2 AUDIO INPUT switch.
FRONT : The sound from the FRONT AUDIO IN connector
is recorded on the CH-2 channel.
REAR : The sound from the REAR AUDIO IN connector is
recorded on the CH-2 channel.
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
5600K 1 64 / ND
.4
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
BACK L STRETCH
NORMAL NORMAL
SPOT L COMPRESS
POWER VTR
ON OFF
CH-1 AUDIO INPUT switch
AUDIO
CH-1 CH-2
LEVEL
AUDIO INPUT
(LINE/MIC) switch
OPEN
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
MODE AUDIO INPUT
VTR AUDIO SELECT
CH-1 CH-2
AUTO
CAM
MANUAL
CH-2 AUDIO INPUT
switch
LCD BRIGHT DISPLAY
MONITOR
SELECT
COUNTER
CH-1
FRONT TC
MIX
CH-2 REAR
UB
CH-1 CH-2
AUDIO INPUT
AUDIO SELECT
AUDIO INPUT
CH-1 CH-2 TC GENE.
FRONT REAR
AUTO
LINE REGEN FREE
REC
MIC MANUAL
+48V
PRST
Selecting the FRONT AUDIO IN connector and REAR
AUDIO IN connector
Select the sound to be input to the AUDIO INPUT connector
using the AUDIO INPUT (LINE/MIC) switch. The setting is
made individually for both the FRONT AUDIO IN connector
and the REAR AUDIO IN connector.
LINE : Set to this position when connected to audio
equipment, etc.
The reference input level is +4 dBs.
MIC : Set to this position when using a monaural
microphone.
The reference input level is –60 dBs.
+48 V : Set to this position when a microphone
(phantom microphone) requiring +48 V DC
power supply is connected.
CAUTION:
Before connecting a component that does not require +48
V power supply, make sure that the AUDIO INPUT (LINE/
MIC) switch is not set to +48 V.
Neglecting this could cause damage to the connected
component.
PHONES DV REAR AUDIO IN TALLY
DC IN
DC OUT
REAR AUDIO IN
connector
E-49