Panasonic KX-NCP0158 Quick Installation Manual page 71

5
[When using a DHCP server]
•
DHCP Client: Enable
•
PBX IP Address: 0.0.0.0 (default)
Note
If the IP-CS and PBX belong to
different subnets, it is necessary
to set PBX IP Address.
6
•
Next Device: Assign IP addressing
information to other IP-CSs.
•
Main Screen: Return to the main
screen.
4.
Turn off the IP-CS.
5.
Return DIP switch no. 7 to the OFF position.
6.
Return the IP address and subnet mask address of the PC to their original values.
Step 7 - Registering IP-CSs to the PBX
1.
In addition to the items you prepared in Step 6, prepare the following items:
Item
PBX
2.
Follow the directions indicated on the PC Maintenance Console.
Document Version 2009-12
OR
A
B
KX-TDE series: MPR Software File Version 3.0000 or later
KX-NCP series: MPR Software File Version 2.0200 or later
A Step-by-step Instructions for Easy Installation
[When not using a DHCP server]
A
•
DHCP Client: Disable
•
IP Address: IP-CS's IP address
•
Subnet Mask, Default Gateway:
Match your network's settings.
•
PBX IP Address: 0.0.0.0 (default)
Note
If the IP-CS and PBX belong to
different subnets, it is necessary to
set PBX IP Address.
Description
B
Quick Installation Guide 71