Using The Remote Control Unit; Installing The Batteries - JVC GR-SXM920 Instructions Manual

52
EN
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR.
1
RM-V715U (provided)
2
3
4
5
6
7
Remote sensor
Buttons
1
Infrared beam
transmitting window
2
ZOOM (T/W) Buttons
3
PLAY Button
4
REW Button
5
STOP Button
6
INSERT Button
7
REC TIME Button
ANIM. Button
8
START/STOP Button
9
FF Button
0
PAUSE Button
!
A.DUB Button
@
INT. TIME Button
SELF TIMER Button*
* This function is unavailable with this camcorder.

USING THE REMOTE CONTROL UNIT

1
1
8
3
9 3
0
2
2
!
@
Transmitted beam
effective area
With the camcorder's Power Switch set
to "CAMERA" ("AUTO" or "PRO.").
Transmits the beam signal.
Zoom in/out (
Retake (rewind), Quick Review
( pg. 26)
Animation, Time-Lapse (
Functions the same as the Recording Start/Stop Button on the camcorder.
Retake (forward) (
Time-Lapse (

Installing The Batteries

The remote control uses two "AAA (R03)" size
batteries. See "General Battery Precautions"
( pg. 65).
1
Open the battery compartment cover as
illustrated.
2
Insert two "AAA (R03)" size batteries in the
correct direction.
3
Replace the battery compartment cover.
When using the remote control, be sure to point it
at the remote sensor. The illustration shows the
approximate transmitted beam effective area for
indoor use.
The transmitted beam may not be effective or may
cause incorrect operation outdoors or when the
remote sensor is directly exposed to sunlight or
powerful lighting.
Functions
pg. 25)
—
—
—
pg. 56)
pg. 26)
—
—
pg. 56)
With the camcorder's Power Switch
set to "PLAY".
Zoom in/out ( pg. 53)
Playback start ( pg. 39)
Rewind, Reverse Shuttle Search,
Previous Still Image Playback
( pg. 39, 44)
Stop ( pg. 39)
Insert Editing ( pg. 54, 55)
—
Fast-Forward, Forward Shuttle Search,
Next Still Image Playback (
44)
Pause ( pg. 39)
Audio dubbing ( pg. 55)
—
pg. 39,