Panasonic KX-TDA50 Operating Manual page 98

1.3.42 Message Waiting
To check the left message and call back
PT/PS
While on-hook
MESSAGE
Press MESSAGE
until the desired
extension appears.
To call back
PT/SLT/PS
Off-hook.
To clear message waiting indications left on your extension
PT/SLT/PS
Off-hook.
•
The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
•
The display shows the messages starting with the most recent call.
•
At a called extension, the MESSAGE button allows you to clear message waiting indications
if you do not want to call the callers back. To clear, press the MESSAGE button and then press
the soft button.
•
On your PT, you can establish one or more Message for Another Extension buttons.
These buttons can accept the message waiting notification of other extensions or various
incoming call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
•
A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
•
KX-TDA100/KX-TDA200/KX-TDA600 only
The message waiting lamp of a single line telephone can also let you know that you have a
message in the same way as the Message button.
98 Operating Manual
Off-hook. Talk.
MESSAGE
OR
7 0
Press MESSAGE or enter 70 and then 2.
7 0
0
Enter 70. Enter 0.
2
Talk.
your
extension no.
Dial your
extension number.
C.Tone
On-hook.
Document Version 2008-10