Display Lock - Panasonic KX-TDA50 Operating Manual

3.1.2 Personal Programming
Item
Extension Dial Lock
To prevent other people from
using your telephone

Display Lock

*1
To prevent other people from
seeing your personal speed
dialing directory, call log, and
SVM log
One-touch Dialing
Assignment Mode
Selection
Do you prefer to set the
One-touch dialing only?
*1 Not available for a PS
*2 Only available for the KX-T7633/KX-T7636/IP-PTs/KX-DT300 series (except KX-DT333) telephones.
CO button numbers (25–36) are available only when the Add-on Key Module is set up to your telephone.
*3
*4 This setting applies to both outside and intercom calls. For intercom calls, this feature must be enabled through system programming.
*5 Only available for certain digital proprietary telephone users.
*6 Only available for KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346 telephones.
Registering and canceling a Bluetooth wireless headset may take time. Please avoid any interruption during that time by, for example,
*7
going off-hook.
CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password (extension PIN).
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a.
Keeping your PIN secret.
b.
Selecting a complex, random PIN that cannot be easily guessed.
c.
Changing your PIN regularly.
•
After the program number is entered, the program title is displayed.
The programming screen can be changed with the Navigator Key (Up or Down).
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
166 Operating Manual
Programming
Input
extension PIN
(max. 10 digits) +
9 1
extension PIN
(max. 10 digits)
+
extension PIN
(max. 10 digits) +
9 2
extension PIN
(max. 10 digits) +
#
Selection & Parameter
To unlock
0
To lock
1
To unlock
0
To lock
1
No—Normal (Any Flexible
0
buttons can be modified.)
Yes—Only One-touch dialing
buttons can be modified. However,
1
to modify them, there is no need to
enter "2" before the number.
Document Version 2008-10