JVC GR-SXM245 Instructions Manual page 21

TAPE LENGTH
Allows you to set the tape length depending on the
tape used: T20=20 minutes, T30=30 minutes,
T35=35 minutes, T40=40 minutes.
• Tape remaining time
correct tape length has been selected.
DISPLAY
FULL: Makes all of the indications appear on the
LCD monitor/viewfinder during playback or
recording.
SIMPLE: Makes the following indications
disappear from the LCD monitor/viewfinder during
recording or playback:
, tape length (
OSD OUTPUT
ON: On-screen indications are displayed.
OFF: On-screen indications are turned off except
Date/Time, Instant Title and Warning Indication.
REC TIME
You can shoot a series of pictures, each slightly
different, of the same object for a brief selected
period of time (Animation). REC MODE should be
set to "SP".
Select the desired recording time and press the
Recording Start/Stop Button
the subject.
• Fade- or wipe-in/out cannot be performed.
• This function is canceled when the power is shut
off or when the cassette is ejected.
1
is correct only if the
, tape remaining time,
pg. 9, 17).
0
after focusing on
INT. TIME
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time (Time-Lapse). REC MODE should
be set to "SP".
Select the desired interval time and press the
Recording Start/Stop Button
• Fade- or wipe-in/out cannot be performed.
• This function is canceled when the power is shut
off or when the cassette is ejected.
21
0
.