JVC GR-SXM245 Instructions Manual page 14

Tracking
Eliminates noise bars that appear on-screen during
playback. To activate Manual Tracking:
1) Press the TRACKING Wheel
u
2 seconds. "MT"
2) Rotate the TRACKING Wheel
noise bars disappear.
• To return to Auto Tracking, press the TRACKING
1
Wheel for approx. 2 seconds or set the Power
!
Switch to "OFF" and then "
blinks. When Auto Tracking finishes, the indication
disappears.
• When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and
u
"AT" appears.
• Manual Tracking may not work with tapes
recorded on other VCRs or camcorders.
TBC (Time Base Corrector)
Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes.
To activate/release the TBC mode, press TBC
during playback for more than 1 second. When the
TBC mode is activated, "TBC"
• The "TBC" indicator
camcorder equipped with a black/white
viewfinder) while TBC is working, and white while
TBC is not operative.
• TBC does not work during Still Playback and
Shuttle Search (
• It may take a few seconds before TBC actually
starts working.
• The picture may be distorted if the TBC mode is
activated or deactivated at the edit-in/-out points
or when normal playback resumes after Still
Playback or Shuttle Search (
• If the playback picture is distorted when TBC is
set to on, turn off TBC.
1
for approx.
appears.
1
so that the
" again. "AT"
w
is displayed.
w
turns green (gray with a
pg. 11).
pg. 11).
Counter Memory
Makes it easier to locate a specific tape segment.
1) Press COUNTER R/M
1 second. The counter
2) Press COUNTER R/M
"M" appears.
3) After recording or playback, press 5
$
. The tape automatically stops at or close
2
to 0:00:00.
u
4) Press 4/6
• The counter memory functions in the Fast-
Forward and Rewind modes.
• To disable the counter memory function, press
COUNTER R/M
"M" disappears.
4
14
(
and hold for more than
r
resets to "0:00:00".
(
for less than 1 second.
%
to start playback.
(
for less than 1 second so that
#
, then