Displaying Rip Redistribution Information; Displaying Rip Redistribution Filter (Restrict) Information - HP ProCurve 2910al Switch Manual

Last update timeticks – How many seconds have passed since the
■
routing switch received an update from this neighbor.

Displaying RIP Redistribution Information

To display RIP redistribution information, enter the show ip rip redistribute
command at any context level:
ProCurve# show ip rip redistribute
RIP redistributing
Route type Status
--------- ----- -
connected enabled
static disabled
Figure 3-13. Example of Show IP RIP Redistribute Output
RIP automatically redistributes connected routes that are configured on
interfaces that are running RIP, and all routes that are learned via RIP. The
router rip redistribute command, described on page 3-31, configures the routing
switch to cause RIP to advertise connected routes that are not running RIP or
static routes. The display shows whether RIP redistribution is enabled or
disabled for connected or static routes.

Displaying RIP Redistribution Filter (restrict) Information

To display RIP restrict filter information, enter the show ip rip restrict command
at any context level:
ProCurve(config)# show ip rip restrict
RIP restrict list
IP Address
--------------- --------------
Figure 3-14. Example of Show IP RIP Restrict Output
Mask
IP Routing Features
Configuring RIP
3-39