Table of Contents
Advertisement
M
P
Q
S
Cleaning (T)
• USE GLOVES
• IMPORTANT
It is very important that you keep your product clean.
Grass clippings left in any of the air intakes or under
the deck could become a potential fire hazard.
1. Remove grass from under the deck with a brush.
2. Using a soft brush - remove grass clippings from all
air intakes, the collection box and the vision window
3. Wipe over the surface of your product with a dry cloth.
• IMPORTANT
Never use water for cleaning your product. Do not
clean with chemicals, including petrol, or solvents -
some can destroy critical plastic parts.
At the End of the cutting Season
1.
Replace tines, bolts, nuts or screws, if necessary.
2.
Clean your product thoroughly.
3.
Make sure that the electric cable is coiled properly.
Storing your product: Store in a dry place where your
product is protected from damage
Collection Box
Removing and Fitting the Tines
Caring for your Product
N
Collection Box Full (M)
1. As the collection box fills up, grass will be clearly
visible through the window in the lid (M).
2. When the window is full it is time to empty the
collection box.
Emptying the Collection Box
1. Lift the collection box at the front and the rear handles (N)
2. Tilt the collection box upside down to release the
collection box flap (P)
3. Empty into your compost or garden waste bin.
4. Ensure collection box flap is fitted correctly before
refitting the collection box
R
Removing and Fitting the Tines
1. Ensure plug is removed from power supply
2. Turn the lawn rake upside down to access the tines
3. Remove the screw from the central disc on the set of
tines you wish to replace (Q)
4. Rotate the central disc to unlock the tines (R)
5. Remove the existing tine and replace with
a new one (S)
6. There are 2 types of tine; a left and a right. When re-
placing a worn tine of one type you should replace it
with a new tine of the same type.
7. Fitting is reversal of removal.
T
Advertisement
Table of Contents
