Page 1
® Mini Trim ET21 Art. 9676944-xx “xx” stands for customer and country Remark: variants. The basic product number is before the hyphen. Operation Instructions Turbotrimmer 41121-85.960.01.indd 1 41121-85.960.01.indd 1 20.09.21 11:38 20.09.21 11:38...
9. SERVICE/WARRANTY ..........8 Intended use: Original instructions. The FLYMO Turbotrimmer is used to trim and to cut grass and lawns in private house and hobby gardens. This product can be used by Do not use the product in public facilities, parks, sports grounds, adjacent to roads or in agriculture or forestry.
Before use, always visually inspect the machine for connected, disconnect the mains at once. damaged, missing or misplaced guards or shields. Contact FLYMO Service to check the unit. c) Never operate the machine while people, especially Warning! This unit makes an electromagnetic field while children, or pets are nearby.
Only use original FLYMO Filament Cassettes. water jet (in particular high-pressure water jet). You can order Replacement Filament Cassettes from The airflow slots must always be clean. your FLYMO dealer or directly from the FLYMO 41121-85.960.01.indd 5 41121-85.960.01.indd 5 20.09.21 11:38...
(Try to remove the filament cassette (15) without to push the latches (12) For Mini Trim ET21 Art. 9676944: FLYMO Filament Cassette and Cutting Filament Reference no.: FLY031 Part no.: 513106090 To replace the cutting filament [Fig. M4/M5]: (15) 1.
Poor performance The cassette holder is dirty. For any other malfunctions please contact the Husqvarna UK Ltd. Customer Service. Repairs must only be done by Husqvarna UK Ltd. service departments or specialist dealers approved by FLYMO. 7. TECHNICAL DATA Turbotrimmer Unit...
This manufacturer’s warranty is limited to replacement and Husqvarna UK Ltd. grants a warranty for all original FLYMO repair of products in accordance with the abovementioned new products for two years from the date of original pur- conditions.
Page 9
FLYMO-approved hereby expressly declare that we accept no liability for service partner or where original FLYMO parts or parts damage incurred from our products where said products authorised by FLYMO were not used.
Page 10
UKCA Declaration of Conformity The manufacturer: Husqvarna AB SE 561 82 Huskvarna, product specific designated standards. This certificate Sweden hereby certifies, when leaving our factory, the becomes void if the units are modified without our unit(s) indicated below is / are in accordance with the approval.