JVC GR-DVL210 Instructions Manual page 55

SYMPTOM
25. Images on the LCD
monitor appear dark or
whitish.
26. The rear of the LCD
monitor is hot.
27. The indicators and the
image color on the LCD
monitor are not clear.
28. The LCD monitor or
viewfinder indications
blink.
29. Colored bright spots
appear all over the LCD
monitor or the viewfinder.
30. During recording, sound
cannot be heard.
31. Play, Rewind and Fast-
Forward functions do not
work.
POSSIBLE CAUSES
25. •In places subject to low
temperature, images
become dark due to the
characteristics of the LCD
monitor. When this
happens, the displayed
colors differ from those that
are actually recorded. This
is not a defect of the
camcorder.
•When the LCD monitor's
fluorescent light reaches the
end of its service life,
images on the LCD monitor
become dark. Consult your
nearest JVC dealer.
26. •The light used to illuminate
the LCD monitor causes it to
become hot.
27. •This may occur when the
surface or the edge of the
LCD monitor is pressed.
28. •Certain Fade/Wipe effects,
certain modes of Program
AE with special effects,
"DIS" and other functions
that cannot be used together
are selected at the same
time.
29. •The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red,
green or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not
recorded on the tape. This is
not due to any defect of the
unit. (Effective dots: more
than 99.99 %)
30. •This is normal.
31. •The Power Switch is set to
" " or " ".
CORRECTIVE ACTION
25. •Adjust the brightness and
angle of the LCD monitor
( pg. 14, 15).
26. •Close the LCD monitor to
turn it off or set the Power
Switch to "OFF", and let the
unit cool down.
27.
————
28. •Re-read the sections
covering Fade/Wipe effects,
Program AE with special
effects and "DIS" (
– 27, 33).
29.
————
30.
————
31. •Set the Power Switch to
" " ( pg. 18).
CONTINUED ON NEXT PAGE
55
EN
pg. 24