Interface For The Technician Level - Siemens FireSeeker FS-250 Programming Manual

F S - 2 5 0 P R O G R A M M I N G

Interface for the Technician Level

When the Technician Level is accessed using the password, the LCD display and
the keypad are used to program the panel, and to view the programming if desired.
The display acts as a menu and the keypad allows the user to navigate through the
menu of functions and change or print the programming. The following figure
describes the navigation used in this context:
Each menu item is associated with "A", "B", "C", or "D" buttons on the keypad.
Pressing one of these keys will cause the panel to go to the function associated with
the button.
For example
ZNxxx P
ZoneType:PRESIG
Timer:___ Sec
To Zone #:___
M A N U A L
Aesc
A-esc: will backup to previous screen
Bfn1
B-fn1: will perform function 1
Cfn2
C-fn2: will perform function 2
Dnxt
D-Nxt: will step to the next screen
Aesc
A-Esc, will backup to previous screen
B+20
B-+20 Jumps ahead 20 devices
Cmor
C-mor shows further options in list
D +1 D-+1, Jumps ahead 1
4