Dubbing; Dubbing To A Vcr - JVC GR-DV2000 Instructions Manual

56
EN
Power Switch
Connector
cover**
S-Video
cable
(provided)
* Connect when an S-Video cable is not used.
** When connecting the cables, open this
cover.
To
AV
To
S-VIDEO
Audio/Video cable
[mini-plug to RCA plug]
(provided)
To AUDIO,
VIDEO* and
S-VIDEO IN
connectors
VCR
TV

Dubbing To A VCR

[To use this camcorder as a player]
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 52 and 53.
2
Set the camcorder's Power Switch to "
pressing down the Lock Button located on the switch,
turn on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
Set "S/AV INPUT" to "OFF" in the Menu Screen
( pg. 39).
4
Engage the VCR's AUX and Record-Pause modes.
5
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press 4/
6 on the camcorder.
6
Press 4/6 on the camcorder and engage the VCR's
Record mode.
7
Engage the VCR's Record-Pause mode and press 4/6
on the camcorder.
8
Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
You can use Playback Zoom (
Special Effects ( pg. 64) in step 6.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 39).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
remote control.

DUBBING

pg. 63) or Playback
pg. 39).
pg. 39). Or, press DISPLAY on the
" while