SETTING THE VEHICLE IN MOTION
With the engine running at idling speed declutch and rotate the gear change twist grip to
the position of 1st gear (fig. 26). For setting the vehicle in motion slowly let in the clutch
and contemporaneously rotate the throttle.
STOPPING THE ENGINE
Before stopping the engine change to « neutral » then rotate the « B » , switch key in the
position 0 cut -out (Fig. 26) key extractable.
TIMING CHECKING AND SETTING
Since in this type of ignition there are not, as we have said at page 31; mechanical parts
exposed to the wear,
Notice - When act on the electrical equipment (see fig. 24), care specially that cables are correct
connected in accordance with the colours carried out on the electronic control box.
Electrical equipment diagram
Bianco = White - Rosso = Red - Viola = Violet - Marrone = Brown - Azzurro = Blue - Giallo = Yellow
- Nero = Black - Verde = Green - Centralina elettronica = Electronic control box.
Fig. 24