JVC GR-DF473 Instructions Manual page 75

Updating [Device Manager]
®
(Windows
If the camcorder is connected to the PC
with the USB cable before installing [USB
Mass Storage Class driver], the installation
might not be performed properly.
In this case, follow the procedure described
below to update the [Device Manager] and
install [USB Mass Storage Class driver]
properly.
NOTE:
Disconnect any other USB audio devices
from PC before performing the following
procedure.
Installing [USB Mass Storage Class driver]
1
Use the USB cable to connect
the camcorder to the PC.
( pg. 8)
2
Click [Start], go to [Settings],
and then click [Control Panel].
Double click the [System] icon.
3
Select the [Device Manager] tab.
4
Delete [GR-D290*] in [Other
devices].
* The model name depends on the
connected camcorder.
5
Disconnect the USB cable from
the camcorder. Restart the PC.
6
Load the provided CD-ROM into
the PC. Install [USB Mass
Storage Class driver]. (
7
Use the USB cable to connect
the camcorder to the PC.
Device driver is installed.
8
Confirm the [Removable Disk]
icon is displayed in [My
Computer].
98SE only)
pg. 5)
— 7 —