Initialising A Memory Card - JVC GR-DF473 Instructions Manual

ADDITIONAL FEATURES FOR D.S.C.
36
EN
To Reset The Number Of Prints
1
Perform steps 1 – 3 in "To Print All Still
Images (One Print For Each)".
2
Press or to select "RESET", and press
SET. The DPOF screen appears.
3
Press or to select "EXECUTE", and press
SET. The normal playback screen appears.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.

Initialising A Memory Card

You can initialise a memory card any time.
After initialising, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Set the VIDEO/MEMORY Switch to
"MEMORY".
2
Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
3
Press MENU. The Menu Screen appears.
4
Press or to select
"FORMAT", and press
SET. The FORMAT
screen appears.
5
Press or to select
"EXECUTE", and press
SET. The memory card is
initialised.
When initialisation is finished, "NO IMAGES
STORED" or "NO E-MAIL CLIP STORED"
appears.
To cancel initialisation, select "RETURN".
CAUTION:
Do not perform any other operation (such as
turning off the camcorder) during initialisation.
Also, be sure to use the provided AC Adapter, as
the memory card may be corrupted if the battery
becomes exhausted during initialisation. If the
memory card becomes corrupted, initialise it.
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN