Theft Indicator; Automatic Arming; Automatic Disarming; Replacement Keys - Mercury Sable 2004 Owner's Manual

Theft indicator

The theft indicator is located in the instrument cluster.
• When the ignition is in the 2 (LOCK) position, the indicator will flash
once every 2 seconds to indicate the SecuriLock
functioning as a theft deterrent.
• When the ignition is in the 4 (ON) position, the indicator will glow for
3 seconds, then turn off to indicate normal system functionality.
If a problem occurs with the SecuriLock
rapidly or glow steadily when the ignition is in the 4 (ON) position. If
this occurs, the vehicle should be taken to an authorized dealer for
service.

Automatic arming

The vehicle is armed immediately
after switching the ignition to the 3
(OFF) position.
The indicator will flash
THEFT
every two seconds when the vehicle
is armed.

Automatic disarming

Switching the ignition to the 4 (ON) position with a coded key disarms
the vehicle.
• The
indicator will illuminate for three seconds and then go
THEFT
out.
• If the
indicator stays on for an extended period of time or
THEFT
flashes rapidly, have the system serviced by your dealer.

Replacement keys

If your keys are lost or stolen and you don't have an extra coded key,
you will need to have your vehicle towed to a dealership. The key codes
need to be erased from your vehicle and new coded keys will need to be
programmed.
Replacing coded keys can be very costly. Store an extra programmed key
away from the vehicle in a safe place to help prevent any
inconveniences. Please visit an authorized dealer to purchase additional
spare or replacement keys.
2004 Sable (sab)
Owners Guide (post-2002-fmt)
USA English (fus)
Locks and Security
system is
system, the indicator will flash
3
2
4
1
5
83