High Beams; Flash To Pass; Panel Dimmer Control - Mercury Sable 2004 Owner's Manual

Mercury sable 2004
Hide thumbs Also See for Sable 2004:
Table of Contents

Advertisement

Lights
• the headlamp control is set to OFF or parking lamp position and
• the parking brake must be disengaged.
Always remember to turn on your headlamps at dusk or during
inclement weather. The Daytime Running Lamp (DRL) system
does not activate with your tail lamps and generally may not provide
adequate lighting during these conditions. Failure to activate your
headlamps under these conditions may result in a collision.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parklamp operation.
Move the control to the full upright
position, past detent, to turn on the
interior lamps.
30
2004 Sable (sab)
Owners Guide (post-2002-fmt)
USA English (fus)
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents