Laser Warning; Service Procedure; Protection Of Eyes From Laser Beam During Servicing - Onkyo DV-SP502 Service Manual

Hide thumbs Also See for DV-SP502:
Table of Contents

Advertisement

QQ
3 7 63 1515 0
SERVICE PROCEDURES-1

PROTECTION OF EYES FROM LASER BEAM DURING SERVICING

This set employs a laser. Therefore, be sure to follow
carefully the instructions below when servicing.
SERVICE WARNING : DO NOT APPROACH THE
LASER EXIT WITH THE EYE TOO CLOSELY.
IN CASE IT IS NECESSARY TO CONFIRM LASER
BEAM EMISSION, BE SURE TO OBSERVE FROM
A DISTANCE OF MORE THAN 30cm FROM THE
SURFACE OF THE OBJECTIVE LENS ON THE
OPTICAL PICKUP BLOCK.
WARNING
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

LASER WARNING

This unit contains a semiconductor laser system and is classified
as a "CLASS 1 LASER PRODUCT". So, to use this model
properly, read this Instruction Manual carefully. In case of any
TE
trouble, please contact the store where you purchased the unit.
L 13942296513
To prevent being exposed to the laser beam, do not try to open
the enclosure.
CAUTION:
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. DO NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

SERVICE PROCEDURE

1. Replacing the fuses
This symbol located near the fuse indicates that the
fuse used is show operating type, For continued protection against
fire hazard, replace with same type fuse , For fuse rating, refer to
the marking adjest to the symbol.
Ce symbole indique que le fusible utilise est e lent.
Pour une protection permanente, n'utiliser que des fusibles de meme
type. Ce demier est indique la qu le present symbol est apposre.
REF. NO.
PART NO.
F1
252310
252252
F1
252147
F1 or
F1 or
252158
www
[NOTE]
<MDD> :North American model
<MUP> :European model
<MUA> :Australian model
.
<MUK> :Korean model
<MUT> :Asian model
http://www.xiaoyu163.com
WARNING!!
DESCRIPTION
REMARKS
2.5A-TH250V
Except <MDD>
1.6A-T/UL-ST2
<MDD> only
1.6A-TSC
<MDD> only
1.6A-UL/T-237
<MDD> only
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Laser Diode Properties
Wavelength: 650/780nm (DVD/CD)
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
The label on the right
is applied on the rear
panel except for USA
Q Q
3
6 7
1 3
1 5
and Canadian
models.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
LASER BEAM CAUTION LABEL
co
.
DV-SP502/502E
9 4
2 8
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
"CLASS 1 LASER
0 5
8
2 9
9 4
2 8
PRODUCT"
m
9 9
9 9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-sp502e

Table of Contents