JVC 32" User Manual page 24

Main
Sub-menu 1
Menu
Sleep
Power
Power Mode
Language
OSD Timeout
Transparency
Time Zone
Settings
Connect Instruction
System Info
Factory Reset
10Min, 20Min, 30 Min, 40Min 50 Min, 60 Min, 70 Min, 80 Min, 90 Min, Off.
* Set the timer to turn off LCD-TV after a specified amount of
time. The power consumption at Sleep status depends on
Power Mode settings ( Normal: < 35 watts ; E. Saver: < 5
watts).
* Off: Disable the sleep timer function.
Normal, E. Saver.
* Normal: When turning off the LCD-TV by pressing POWER
button, power consumption < 35 watts.
* E. Saver: When turning off the LCD-TV by pressing POWER
button, Power Mode enter Normal , after 5 minutes then enter
E. Saver , which power consumption < 5 watts , however the
re-star ( boot up ) time will take more than 10 seconds.
English, Spanish, French. * Switch the language of the OSD.
10 Sec, 30 Sec, 60 Sec.
0 ~ 10.
Atlantic, Eastern, Central, Mountain, Pacific, Alaska, Hawaii.
Press OK to display an on-screen connection guide. Press again to exit.
Press OK to display the firmware version and built-on date. Press again to exit.
Press OK → Yes, No.
Sub-menu 2 / 3
* Set the amount of time of inactivity before the OSD
disappears.
* Adjust the level of transparency of the OSD.
* Set the LCD-TV to the local time zone.
* Select Yes to reset all OSD settings back to the
factory defaults.
23