JVC 32" User Manual page 21

Main
Sub-menu 1
Menu
Mute
Aux Out
Audio
HDMI
Sleep
Power
Power Mode
Language
OSD Timeout
Transparency
Settings
Time Zone
Connect Instruction
System Info
Factory Reset
20
On, Off. * Turn the sound off or on.
On, Off. * On: Enable external audio out.
* Off: Disable external audio out.
Internal, DVI R/L.
* Internal: HDMI cable integrated audio input.
* DVI R/L: RCA audio Input for DVI source.( refer to page 13)
10Min, 20Min, 30 Min, 40Min 50 Min, 60 Min, 70 Min, 80 Min, 90 Min, Off.
* Set the timer to turn off LCD-TV after a specified amount of time.
The power consumption at Sleep status depends on Power Mode
settings ( Normal: < 35 watts ; E. Saver: < 5 watts).
* Off: Disable the sleep timer function.
Normal, E. Saver.
* Normal: When turning off the LCD-TV by pressing POWER
button, power consumption < 35 watts.
* E. Saver: When turning off the LCD-TV by pressing POWER
button, Power Mode enter Normal , after 5 minutes then enter E.
Saver , which power consumption < 5 watts , however the re-star
( boot up ) time will take more than 10 seconds.
English, Spanish, French.
* Switch the language of the OSD.
10 Sec, 30 Sec, 60 Sec
* Set the amount of time of inactivity before the OSD disappears.
0 ~ 10.
* Adjust the level of transparency of the OSD.
Atlantic, Eastern, Central, Mountain, Pacific, Alaska, Hawaii.
* Set the LCD-TV to the local time zone.
Press OK to display an on-screen connection guide. Press again to exit.
Press OK to display the firmware version and built-on date. Press again to exit.
Press OK → Yes, No.
* Select Yes to reset all OSD settings back to the factory defaults.
Sub-menu 2 / 3