Viewfinder Adjustment; Brightness Adjustment Of The Display; Tripod Mounting - JVC GR-D320E Instructions Manual

GETTING STARTED
16
EN

Viewfinder Adjustment

1
Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Example:
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
Dioptre Adjustment Control
Brightness Adjustment Of The
Display
1
Set the Power Switch
to "REC" or "PLAY" while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. ( pg. 18)
To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
"PRIORITY" to "FINDER"
( , 25)
pg. 23 .
3
Press MENU. The
Menu Screen appears.
If you are in Playback mode, please proceed to
step 5.
4
Press or to select "DISPLAY", and
press SET or . The DISPLAY Menu appears.
5
Press or to select "BRIGHT", and press
SET or . The Menu Screen closes and the
brightness control MENU appears.
6
Press or until the appropriate
brightness is reached and press SET or
7
Press MENU. The Menu screen closes.

Tripod Mounting

To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
Some tripods are not
equipped with studs.
MENU
BRIGHT
.