DIGITAL VIDEO CAMERA GR-D350AG Please visit our Homepage on the World Wide Web for Digital Video Camera: http://www.jvc.co.jp/english/cyber/ For Accessories http://www.jvc.co.jp/english/accessory/ INSTRUCTIONS Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the pages 2 –...
This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN- VF707U/VF714/VF733U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.
Continue using the camcorder or AC Adapter under these conditions could lead to fire or electric shock. Contact your JVC dealer. Do not attempt to repair the malfunction yourself. ÷ To prevent shock, do not open the cabinet. No user serviceable parts inside.
Page 4
It could tip over, causing serious damage to the camcorder. CAUTION! Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving it on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.
Page 5
( Auto Button You can change the recording mode between manual setting to the standard mode setting of the camcorder by pressing the AUTO button.( pg. 14) AUTO Backlight Compensation Simply pressing the BACKLIGHT button pg.
Page 6
So, for important recordings, we recommend using SP mode. It is recommended that you use JVC brand cassette tapes. Your camcorder is compatible with all brands of commercially available cassette tapes complying...
11 for attachment) NOTES: In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
PUSH BATT. to detach it. BN-VF707U* BN-VF714U BN-VF733U * Provided NOTES: It is recommended that only genuine JVC batteries are used in this camcorder. Using PUSH BATT. generic non-JVC batteries can cause damage to the internal charging circuitry. If the protective cap is attached to the battery pack, remove it first.
Page 13
3 times the planned shooting time. ATTENTION: Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction. Data Battery System You can check the remaining battery power and the recordable time.
GETTING STARTED Operation Mode To turn on the camcorder, set the Power Switch to any operation mode except “OFF” while pressing down the Lock Button located on the switch. Lock Button MENU AUTO Choose the appropriate operation mode according to your preference using the Power Switch.
Date/Time Settings The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. ( pg. 25) Perform steps 1 – 4 in “Language Settings” on the left column. Press 3 or 4 to select “CLOCK ADJ.”, and press SET or 2.
Then tighten the screw clockwise. Some tripods are not equipped with studs. Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. OPEN/EJECT Cassette holder cover PUSH Cassette holder Make sure the window side is facing out.
(“ PAUSE” indicator may not appear), the camcorder’s power shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor. When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape.
first. If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when “TELE MACRO” is set to “ON”. ( Journalistic Shooting In some situations,...
When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform Recording From The Middle Of A Tape ( pg.
To cancel Blank Search midway, press 7. NOTES: Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
* Not required for watching still images only. NOTE: The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Centre described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camera.
MENUS FOR DETAILED ADJUSTMENT Changing The Menu Settings This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. pg. 22 – 25) Lock Button MENU For Video Recording Menus: Set the Power Switch to “REC” while pressing down the Lock Button located on the switch.
If the recording mode is switched, the playback picture will be blurred at the switching point. It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder. MENUS FOR DETAILED ADJUSTMENT During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.
Page 24
TV. TIME CODE [OFF] : Time code is not displayed. ON : Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording. ( DEMO MODE OFF : Automatic demonstration will not take place.
Playback Menus [ ] = Factory-preset SOUND MODE and NARRATION During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.
FEATURES FOR RECORDING Wide Mode This camcorder allows you to choose the type of image output format for recording. [ ] = Factory-preset Set the Power Switch to “REC”. Press 16:9 button repeatedly to choose your selection. 16:9 [4:3]: Records with no change in the screen ratio.
Manual Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity. However, correct focus may not be obtained depending on the shooting condition. In this case, use the manual focus mode.
FEATURES FOR RECORDING Iris Lock Like the pupil of the human eye, the iris contracts in well-lit environments to keep too much light from entering, and dilates in dim environments to allow in more light. Use this function in the following situations: When shooting a moving subject.
The white balance is usually adjusted automatically. However, more advanced ”. ( pg. 14) camcorder operators control this function manually to achieve a more professional colour/ ” appears. tint reproduction. To change the setting Set “W.BALANCE” in Function Menu. ( The selected mode indicator except “AUTO”...
FEATURES FOR RECORDING Manual White Balance Adjustment Adjust the white balance manually when shooting under various types of lighting. Set the Power Switch to “REC”. Set the recording mode to “ ”. ( pg. 14) Hold a sheet of plain white paper in front of the subject.
TWILIGHT more natural. White Balance ( automatically set to “ your desired setting. When Twilight is chosen, the camcorder automatically adjusts the focus from approx. 10 m to infinity. From less than 10 m, adjust the focus manually. pg. 22) SHUTTER OFF: Disables the function.
* Not required for watching still images only. NOTE: The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Centre described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camera.
When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable. To use this camcorder as a recorder Make sure all units are turned off. Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.
It is recommended to use the AC Adapter as the power supply instead of the battery pack. When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV ® cable depending on the type of DV connector XP, you can use (4 or 6 pins) on the PC.
TROUBLESHOOTING If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly.
Page 36
➜Set the date/time. ( The built-in clock battery has run out and the previously set date/time has been erased. ➜Consult your nearest JVC dealer for replacement. pg. 26) When the image is printed from the printer, a black bar appears at the bottom of the screen.
Page 37
Appears when the date/time is not set. pg. 15) The built-in clock battery has run out and the previously set date/time has been erased. Consult your nearest JVC dealer for replacement. LENS CAP Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark.
Mould may form if the lens is left dirty. When using a cleaner or chemically treated cloth refer to the cautions of each product. To clean the viewfinder, please consult your nearest JVC dealer.
LCD Monitor To prevent damage to the LCD monitor, DO ... push it strongly or apply any shocks..place the camcorder with the LCD monitor on the bottom. To prolong service life ... avoid rubbing it with coarse cloth.
Page 40
20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions. If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time.
Camcorder For General Power supply DC 11 V (Using AC Adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 3.0 W (LCD monitor off, viewfinder on) Approx. 3.4 W (LCD monitor on, viewfinder off) Dimensions (W x H x D) 59 mm x 94 mm x 114 mm (with the LCD monitor closed and the viewfinder pushed back...
TERMS AC Adapter ...13 Auto/Manual Mode ...14 Backlight Compensation ...28 Battery Pack ...11, 12, 39 Blank Search ...20 Changing The Menu Settings ...22 – 25 Charging The Battery Pack ...12 Connection To A Personal Computer ... 34 Connections To A TV Or VCR ...21 Data Battery ...13 Date/Time Settings ...15 Demonstration Mode ...24...