Table of Contents
Advertisement
GETTING STARTED
12
EN
NOTE:
The provided AC Adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause
a fire or explosion.
WARNING! Do not allow the battery or its terminals to
come in contact with metals, as this can result in a short
circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large power
capacity. However, when one is exposed to cold
temperatures (below 10°C), its usage time becomes
shorter and it may cease to function. If this happens, place
the battery pack in your pocket or other warm, protected
place for a short time, then re-attach it to the camcorder.
Operation Mode
To turn on the camcorder, set the Power Switch to any
operation mode except "OFF" while pressing down the
Lock Button located on the switch.
VIDEO/MEMORY
(Up)
MENU
(Down)
Choose the appropriate operation mode according to
your preference using the Power Switch and VIDEO/
MEMORY Switch.
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard recording.
The "A" indicator appears on the display.
M (Manual Recording):
Allows you to set various recording functions using the
Menus. (
pg. 27)
If you want more creative capabilities than Full Auto
Recording, try this mode.
OFF:
Allows you to switch off the camcorder.
PLAY:
Allows you to play back a recording on the tape.
Allows you to play back a video clip on the memory
card.
Allows you to display a still image stored in the
memory card or to transfer a still image stored in the
memory card to a PC.
Allows you to set various playback functions using
the Menus. (
pg. 27)
Power Switch
Lock Button
M
A
OFF
PLAY
POWER/
CHARGE
POWER/CHARGE lamp
SET
VIDEO/MEMORY Switch Position
VIDEO:
Allows you to record on a tape or play back a tape. If
"REC SELECT" is set to "
images are recorded both on the tape and the memory
card.
MEMORY:
Allows you to record in a memory card or access
data stored in a memory card.
When the Power Switch is set to "A" or "M", the
currently selected image size appears.
Power-Linked Operation
When the Power Switch is set to "A" or "M", you can also
turn on/off the camcorder by opening/closing the LCD
monitor or pulling out/pushing in the viewfinder.
INFORMATION:
The following explanations in this manual supposes the
use of LCD monitor in your operation. If you want to use
the viewfinder, close the LCD monitor and pull out the
viewfinder fully.
Date/Time Settings
The date/time is recorded onto the tape at all times, but
its display can be turned on or off during playback.
(
pg. 27, 31)
1
Set the Power Switch to "M" while pressing down the
Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Press MENU. The Menu Screen appears.
4
Press
or
to select "n",
and press SET. The CAMERA
DISPLAY Menu appears.
5
Press
or
to select
"CLOCK ADJ.", and press SET.
The parameter for "Day" is
highlighted.
6
Press
or
to input the day,
and press SET. Repeat to input the
month, year, hour and minute.
7
Press
or
to select
"BRETURN", and press SET twice.
The Menu Screen closes.
Built-in Clock's Rechargeable Lithium Battery
If the camcorder is not used for approx. 3 months, the
clock's lithium battery will become discharged and the
date/time stored in memory will be lost. When this
occurs, first connect the camcorder to an AC outlet using
the AC Adapter for over 24 hours to charge the clock's
rechargeable lithium battery. Then perform the date/time
setting before using the camcorder.
Note that the camcorder can be used without setting the
date/time.
/
" (
pg. 30), still
pg. 15)
C M
A
ERA
D
I
S
P
LA
Y
ON S
CRE
E
N
–
LC
D
T /
V
DA E
T
/ T I
ME
–
AU
T
O
T I E
M
CO
DE
–
OF
F
AU
X
M I C
–
ON
CL C
O K
2 0
.
2 1
. 0 4
AD .
J
7 1
: 3 0
RETUR
N
C M
A
ERA
D
I
S
P
LA
Y
CL C
O K
2 0 .
2 1
. 0 4
AD .
J
7 1
: 3 0
RETUR
N
Hide quick links:
Advertisement
Table of Contents
