Dial Profiles - TANDBERG MCU User Manual

Dial Profiles

Specifies the service prefix which the MCU must use when dialing out. Example: If you have to use '0' in order to
call outside your location, create a profile called 'Ext' with a prefix set to '0'.
Name
Enter the name of the new profile here.
Prefix
Enter the call prefix of the new profile. This could for example be 0 for external calls.
Network
Auto IP addresses will select H.323. All other numbers will select H.320.
H.320 The MCU will always use H.320 when this dial profile is selected.
H.323 The MCU will always use H.323 when this dial profile is selected.
Save
Press 'Save' to activate the new Dial Profiles.
Cancel
Discard changes made, and display the previous settings.
TANDBERG MCU
57
Configure the MCU