Mounting Options; Surface Wall Mount - Iqinvision Alliance-mini Series Installation And Operating Instructions Manual

5 Mounting Options

The IQeye Alliance-mini is designed to be used in one of the following
configurations:
1. Surface mounted to any interior durable surface wall.
2. Surface mounted to a plenum or other durable ceiling surface.
3. Mounted to the Alliance-mini Dome Wall Mount (P/N IQD4-WB or IQD4-WG).
(For use with Standard Camera Model only.)
4. Used in conjunction with a ¾" NPT threaded pipe (not included) as part of
a pendant mount solution with the use of the Alliance-mini Pendant Mount
Adapter Multi-Pack (P/N IQD4-PB or IQD4-PG).
NOTE: The first section of this guide covers installation of an IQeye Alliance-mini without the optional
mounting adapters. The subsequent sections briefly discuss how to mount the dome camera with the
optional adapters.
6 Mounting on to an Interior Durable Surface Wall
1. Remove the trim cover
Standard Camera Model: remove the camera trim cover by pressing the
mounting clips on both sides with the supplied trim cover removal tool. Then
pivot the trim cover up and away from the camera base as shown in Image 6.1.
Side 1
Side 2
Image 6.1
5
Cover Removal