Parts List; Mounting Options; Camera/Arm Removal And Adjustment - Iqinvision IQeye Sentinel Series Installation And Operating Instructions Manual

5. Parts List

The following depicts the parts included:
1 Indoor/Outdoor Camera and
Lens Module
2 Wall, Ceiling & Parapet Arm
3 Power/Data Back Box
Tools required:
3mm Allen wrench (supplied)
Small straight-blade screw driver
Punch down tool (supplied)

6. Mounting Options

Wall Mount
7. Camera/Arm Removal & Adjustment
Note: The camera/arm needs to be removed from the back box to allow the back
box to be mounted to the designated mounting wall, ceiling, or parapet surface.
1. Using the Allen wrench (supplied) loosen the 4 screws located on the
corners of the power/data back box.
2. Unplug the two camera-side connections from the back box.
Ceiling Mount
5
1
2
Parapet Mount
3
Figure 1
Figure 2