8 Setup
• The mains plug shall remain readily operable so that it
can be removed easily to disconnect the power.
• When placed in a cabinet, make sure there is a minimum
space of 10 centimetres around it. For the physical spec-
ification of the digital receiver, refer to Table 2.2.
• Protect the power cord from being walked on or pinched.
If the cord is damaged, do not use the digital receiver and
get the cord replaced.
• Refer all servicing to a qualified service technician.
• To maintain proper ventilation, always leave sufficient
space around the digital receiver.
Table 2.1: Power specification
Input voltage
Power consumption
Table 2.2: Physical specifications
Size
Weight(Net)
Operating temperature
Storage relative humidity
100 to 240 V AC, 50/60 Hz
24 W at maximum in active
Under 1 W in passive standby
260× 46× 190 mm
3.1 kg
◦
0 to 45
C
5 to 90 %