Automatic Demonstration; Provided Accessories - JVC GR-AXM226 Instructions Manual

4
EN
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
Available when the Power Switch is set to "
Operating the Power Zoom Lever during the demonstration stops the
demonstration temporarily. If the Power Zoom Lever is not moved for
more than 1 minute after that, the demonstration will resume.
"DEMO MODE" remains "ON" even if the camcorder power is turned
off.
To cancel Automatic Demonstration, set the Power Switch to " " and
press the MENU Wheel in while the demo is in progress. This takes you
directly to the demo mode's Setting Menu (so you will not have to go
through the main Menu Screen). Rotate the MENU Wheel to select
"OFF" and press it.
NOTES:
When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor or viewfinder.

AUTOMATIC DEMONSTRATION

" or "

PROVIDED ACCESSORIES

•AC Adapter
AP-V10U
•Battery Pack
BN-V11U
•Shoulder Strap
".
DEMO MODE
O F F
O N
E X I T
Setting Menu
•Cassette Adapter
(VHS Playpak) C-P7U
•AA (R6) Battery
(for Cassette Adapter)
•Lens Cap