JVC GR-AXM226 Instructions Manual page 24

24
EN
SYSTEM MENU (cont.)
TAPE LENGTH
DISPLAY
REC TIME
INT. TIME
TELE MACRO
TITLE LANG.
DATE/TIME
DEMO MODE
: Factory-preset
Allows you to set the tape length depending on the tape used (
FULL Make all of the indications appear on the LCD monitor/
viewfinder during playback or recording.
Make the following indications disappear from the LCD
SIMPLE
monitor/viewfinder during recording or playback: cassette
warning, tape remaining time, battery pack remaining power
indicator and tape length indicator (
Refer to "Animation" and "Time-Lapse" (
Refer to "Time-Lapse" (
Usually the distance to a subject where the lens is in focus
OFF
depends on the zoom magnification. Unless there is a distance of
more than 1 m (3.25 ft) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to "ON", you can
ON shoot a subject as large as possible at a distance of approx.
60 cm (23-5/8").
•Depending on the zoom position, the lens may go out of focus.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles ( pg. 25).
Allows you to set the current date and time (
Demonstrates certain functions automatically. When "DEMO
ON
MODE" is set to "ON" and the Menu Screen is closed, the
demonstration starts.
Operating the Power Zoom Lever during the demonstration
stops the demonstration temporarily. If the Power Zoom Lever is
not moved for more than 1 minute after that, the demonstration
will resume.
NOTE:
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
Automatic demonstration will not take place.
OFF
RECORDING
pg. 26).
pg. 26).
Advanced Features (cont.)
pg. 12).
pg. 40, 41)
pg. 10).