Technical Data - TomTom LINK 530 Installation Manual

Technical data

Dimensions
Weight
Material
Protection class
Supply voltage
Current consump-
tion (average
values)
Fuse protection
Temperature
Mobile networks
GPS
Bluetooth
TM
Ignition input
Digital inputs
Digital output
CANbus
GPS antenna
connector for
external GPS
antenna
(optional accesso-
ry)
Body: 121 x 56.5 x 21.5 mm / 4.76 x 2.22 x 0.85 inches
Body with Holder: 121 x 68 x 25.5 mm / 4.76 x 2.68 x 1.00 inches
Body: 92 g / 3.3 ounces
Holder: 14 g / 0.5 ounces
Body and holder: Injection moulded plastic PC/ABS
IP 30
12 V / 24 V (min. 9 V to max. 30 V)
At 14 V: typically < 50 mA
At 28 V: typically < 30 mA
Standby: typically < 1 mA
During data transmission
14V < 150 mA
28V < 100 mA
Operating voltage* 9 - 30 V to be fused with max. 10A
Ignition to be fused with max. 10A
* Internally fused with 2A, fuse is not resettable or replaceable, fuse must
be replaced by TomTom Business Solutions only
Operation: -30 °C to +70 °C / -22 °F to +158 °F
Storage: -40 °C to +80 °C / -40 °F to +176 °F
Integrated mobile network module intended for connection to one or
more of the following mobile network frequencies:
800/850/900/1800/1900/2100 MHz
Integrated GPS antenna and GPS receiver
Integrated BluetoothTM (class 2) for connection to navigation device
To be connected to the ignition clamp to switch on/off device together
with ignition
2 inputs switchable to supply voltage
1 output switchable to ground (open drain)
CAN H, CAN L
SMB (male) - (antenna - female)
Supply voltage range 3.3 V
Minimum antenna gain at 3 V: 20 dB
Maximum antenna gain: 40 dB
Maximum noise rating: 1.5 dB
27