Activating The Link 530 - TomTom LINK 530 Installation Manual

Activating the LINK 530

After you have updated your LINK 530 with the latest firmware version you need to activate the
LINK 530 using the TomTom LINK Activation Tool. You can also
PRO navigation device.
To activate your LINK 530 using a computer you need to connect it using a USB cable. Download
the USB driver from the Partner Portal and install the driver on your computer by double clicking
the exe file.
To activate your LINK 530 do the following:
1. Install the latest version of the TomTom LINK Activation Tool.
You can download the Activation Tool from the Partner Portal at
https://business.tomtom.com/10001/areas/reseller/index.xml. Go to Techinical Support and
select Activation and Diagnostics.
2. Connect your LINK 530 to supply voltage.
3. Connect your LINK 530 to your computer using the Mini USB cable.
4. Start the TomTom LINK Activation Tool by double clicking the icon.
5. Click Serial Connect and select the COM port to which you have connected your LINK 530.
6. Monitor the yellow connection LED
established a connection to WEBFLEET.
on your LINK 530 until it indicates that the device has
12
activate your LINK 530 using a