Table of Contents
Advertisement
78
EN
SYMPTOM
POWER
No power is supplied.
The power suddenly goes off and
doesn't come back on by itself.
OTHER
Some functions are not available.
Vertical white lines appear when
shooting a very bright object.
Bright, crystal-shaped spots appear
in the viewfinder.
The viewfinder and the lens have
become dirty (ex. fingerprints).
An error number (i.e. E03) appears.
The image is out of focus.
Even though the Lens Cover is open,
the Lens Cover Warning indicator
blinks.
The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,
etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit
(battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and
proceed as usual from the beginning.
TROUBLESHOOTING
POSSIBLE CAUSE(S)
The battery pack has not been attached correctly
(
pg. 10).
The battery pack is not charged (
The power supply has not been correctly connected
(
pg. 11).
The battery pack has completely discharged.
Remove the cassette and disconnect the power source,
then after a few minutes, try turning the power back on. If
it still doesn't come on, consult your nearest JVC dealer.
The Select Dial is set to "AUTO LOCK".
This sometimes occurs when the contrast between the
background and the object is great. It is not a defect of the
camcorder.
Sunlight is directly entering the lens. This is not a defect of
the camcorder.
Wipe them gently with soft cloth.
Turn the camcorder's power off, then disconnect the
power source. After a few minutes, try turning the power
on again. If the error number still appears, consult your
nearest JVC dealer.
The diopter needs to be adjusted (
The scene being shot is adversely affecting the operation
of Auto Focus (
pg. 34).
The Lens Cover Warning indicator may blink when the
camcorder is used in dark areas, regardless of the position
of the Lens Cover.
pg. 10).
pg. 14).
Advertisement
Table of Contents
