Recording; Basic Recording - JVC GR-AX18EG Instruction Manual

12
EN
LENS COVER Switch
Power
Switch
Start/Stop Button
Tally lamp
(lights while recording is in progress)
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power (
Tape Length Setting (
Recording Mode Setting (
Grip Adjustment (
Power
1
indicator
Shooting while watching the viewfinder
2
3

RECORDING

pg. 4)
pg. 10)
LOAD A CASSETTE
First open the LCD monitor to an angle of over 45
degrees.
Press EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
ENTER RECORD–STANDBY MODE
Make sure the LCD monitor is closed and locked.
Slide the LENS COVER Open/Close Switch to open
the lens cover, then set the Power Switch to
CAMERA.
•The power indicator lights and the camcorder
enters the Record–Standby mode.
•The scene you're aimed at appears on the
viewfinder screen, with the word "PAUSE"
superimposed upon it.
START SHOOTING
Press the Recording Start/Stop Button.
REC
•" " appears in the viewfinder while recording is
in progress.

Basic Recording

pg. 8)
pg. 8)