Function Key Mapping; Fn1 Substitution; Send Make And Break - Symbol LS3478-FZ Reference Manual

5-12 Symbol LS3478 Product Reference Guide

Function Key Mapping

ASCII values under 32 are normally sent as control key sequences (see Table 5-2 on page 5-15). Enable this parameter to send the
keys in bold in place of the standard key mapping. Table entries that do not have a bold entry remain the same regardless of this
parameter.
Enable Function Key Mapping
*Disable Function Key Mapping

FN1 Substitution

When enabled, this parameter replaces any FN1 character in an EAN128 bar code with a keystroke chosen by the user. See FN1
Substitution Values on page 13-8.
Enable FN1 Substitution
*Disable FN1 Substitution

Send Make and Break

When enabled, the scan codes for releasing a key are not sent.
*Send Make and Break Scan Codes
Send Make Scan Code Only