HELIX 8200 Operating And Service Instructions page 9

8200 Compressor
Specification
Interface
Adsorber service schedule
Cooling water require-
ments (water cooled only)
P/N 8040353
Table 1-2: General Specifications
Cold head power receptacle: Mates with plug on cold head
power cable.
On-Board power receptacle: Mates with plug on cold-head
power cable.
Compressor input-power terminal block enclosure: Mates with
input power cable, fabricated by customer or available from
CTI-CRYOGENICS.
Gas-supply connector: 1/2-inch self-sealing coupling
Gas-return connector: 1/2-inch self-sealing coupling
Replace every 12 months.
100°F (38°C) maximum discharge temperature
Refer to Figures 3-5 and 3-6 for parameters.
C TI
HELIX TECHNOLOGY CORPORATION
Description
-
CRYOGENICS
1-5