Table of Contents
Advertisement
Section 2. Problem Determination
Procedures
Introduction
The Problem Determination Procedures help you solve
operational or system failures. These procedures will
also perform a complete system checkout. By following
the step-by-step instructions and answering yes or no to
the questions asked, you will be able to determine
which unit of your system has a problem.
As part of your problem determination, you may have
to load the Diagnostics diskette (the diskette is at the
back of this manual). The Diagnostics diskette has a
series of tests to help you find your problem in any of
the five units of your system. These five units are the
system unit, expansion unit, keyboard, display, and
printer.
The Diagnostic diskette is programmed to test only the
system and its installed options. These tests are
performed in sequential order.
As
each test is
successfully completed, the next test will be performed.
January 1984
Problem Determination 2-1
Hide quick links:
Advertisement
Table of Contents
