IBM 5155 Manual To Operations page 336

Installation Requirements
• If your system unit has not yet been set up, do so
now.
• The communications adapter to which you are
connecting this option should already be installed in
~
your system. If not, refer to the communications
adapter option instructions, and install it before
continuing.
• The
non-IBM
devices shown in this manual are for
illustration only; their use here does not constitute a
recommendation or an endorsement by IBM.
Selection, interconnection, and use of another
manufacturer's device are the sole responsibility of
the customer.
Tool Required
• Small, flat-blade screwdriver
2 Communications Cable January 1984