IBM 5155 Manual To Operations page 136

7
Wait 15 seconds. Do all stations installed in the
Cluster appear and remain on the screen
presentation?
8 B
@] @]
B @] @]
~
EJ
~ ~ EJ
8 El
§] @]
@]
§]
@]
~
CLUSTER STATUS FOR ADAPTER X
PRESS ANY KEY TO EXIT
Notes:
1. Your Installation Manager has a Cluster map
that lists the station addresses and the order
in which the stations are connected. Compare
the map and the status screen presentation to
determine that all of the stations on the
Cluster are operating properly.
2. The status screen shows all stations installed
on your Cluster, and is updated every 3
seconds to show stations that are added to or
removed from the Cluster.
YES - Your system has successfully completed
this test. Press any key and continue
with the next Test.
NO - Go to the next step.
2200-8 Test January 1984