Setting The Channel Data (Main Menu) - Alinco DR-135 Dealer's Manual

3.
To start the DR-135 Data Editor, at the DOS prompt, type:
DR135.EXE DR135.EXE DR135.EXE DR135.EXE
or,
DR135 DR135
DR135 DR135
The main menu will appear.
Note:

3.3 Setting the Channel Data (Main Menu)

On the main menu, you can set the parameters for each channel. To move the
cursor between the fields, use the cursor keys. To select an option in each field,
press the space bar. To enter a numeric value, use the numeric keys. A
detailed description of the fieIds are listed on the next page.
Note:
Ch:
Name:
Ref:
• To exit the Data Editor, press the F2 key, select the "Quite Editor (Q)"
option, and type Y.
• This software supports the context-sensitive help. Press the F1 key to
obtain the information about the field where the cursor is placed.
Select the desired channel (from 0 through 99), PL, PH, CALL(C),
and VFO(V) by using the up or down cursor keys
Write an alphanumeric name instead of the CH No.
Press the Enter key to go to input mode. Input the name using the
keyboard, and press the Enter key to set the name.
Set the channel step for the frequency to be set using CH Data
Editor.
7